Retro Spares Shop

Components for C64, Speccy and more!

My Cart: 0 Items
Search:

Misc. components for Commodore 64

Various parts found in the C64

Products:

Click on the product thumbnail for an enlarged view.

1.5A 32mm Internal fuse for Commodore 64

Replacement internal fuse for Commodore 64

  • A 32mm (1.25") 1.5 Amp quick acting fuse as used inside the C64.
Price: £ 0.50   Add to cart: (12 in stock)
160mA 20mm Fuse for C64 PSU

160mA 250V 20mm main fuse for C64 PSU

  • As used in the C64 grey "wedge" PSU (fuse holder at rear of unit)
Price: £ 0.25   Add to cart: (5 in stock)
Commodore 64 Case Screw (5.4mm head)

Commodore 64 Case Screw (5.4mm head) - Sold individually.

  • These are the narrower 5.4mm diameter head types which are less common in the breadbins (but usual for the C64C models that are not just clipped togther) - please check your case.
  • Also used internally for screwing the keyboard to the top part of the case (in breadbins).
  • Brand new direct replacement screws, sold indivually
Price: £ 0.09   Add to cart: (17 in stock)
Commodore 64 Case Screw (6.6mm head)

Commodore 64 Case Screw (6.6mm head) - Sold individually

  • These are the more common stubby-looking 6.6mm diameter head type.
  • Also used internally for screwing the keyboard to the top part of the case.
  • Brand new direct replacement screws, sold indivually.
Price: £ 0.09   Add to cart: (10 in stock)
Commodore 64 Metal Power Badge

Commodore 64 Metal Power Badge

  • Original C64 breadbin "Power" badge in very good condition
  • Best attached with a tiny spot of glue
Price: £ 1.50   Add to cart: (1 in stock)
Commodore 64 Metal Rainbow Badge

Commodore 64 Breadbin "Rainbow" Badge

  • Original C64 metal badge in very good condition - no chips in the paintwork.
  • Dimensions: 109.6mm x 10.7mm (Note: The inlay on breadbin cases is usually about 1mm longer than this allowing the badge to drop in easily, however on some cases it can be too short - please check your case). 
  • Fresh 3M brand double-side tape applied to back, ready to peel and apply.
Price: £ 3.50   Add to cart: (0 in stock)
Foil shielding for "breadbin" Commodore 64 (Used)

Foil / card shielding for "breadbin" Commodore 64 (Used)

Various kinds of cardboard foil shields were used in the C64s. This particular type is from board revision 250425. It has full length shielding top and bottom with a clip for the bracket over the cartridge port (see photo).

  • No serious tears / damage. Clip is intact.
Price: £ 2.50   Add to cart: (0 in stock)
Lid for video shield box in Commodore 64

Lid for the video shield box on Commodore 64 PCB

  • Part number: 251024 - As used in PCB assy no.s 250407 revs A,B,C
  • Good condition, all tabs intact.
Price: £ 2.50   Add to cart: (2 in stock)
Motherboard screw for Commodore 64

C64 (breadbin) motherboard to lower case screw - Sold individually

  • Brand new direct replacement screws, sold indivually
  • 7  of these screws are used to hold the motherboard to the lower case. 
Price: £ 0.08   Add to cart: (12 in stock)
Port plate for Commodore 64

Port plate / bracket for "breadbin" style Commodore 64

  • Clean and in very good condition, with all printed characters intact.
  • Round type power port cut-out.
  • With original screws
Price: £ 3.50   Add to cart: (0 in stock)
Port plate for Commodore 64 - Grade B

Port plate / bracket for "breadbin" style Commodore 64 - "Grade B"

  • As above but will have some small mark or slightly worn character preventing it being Grade A condition
Price: £ 2.00   Add to cart: (3 in stock)
Power LED assembly for C64C - GREEN

Power LED assembly for C64C (Green LED)

  • Original, rectangular GREEN power LED with connector for C64C
  • Approx 14cm long
  • Not suitable for "breadbin" C64 (see below for those).
Price: £ 1.99   Add to cart: (0 in stock)
Power LED assembly for C64C - RED

Power LED assembly for C64C (Red LED)

  • Original, rectangular RED power LED with connector for C64C
  • Approx 14cm long
  • Not suitable for "breadbin" C64 (see below for those)
Price: £ 1.99   Add to cart: (2 in stock)
Power LED for breadbin C64 including new grommet

Red Power LED, cable and socket with new fixing grommet

  • Standard RED Commodore 64 power LED with cable and plug as used in the breadbin C64 (about 25CM long)
  • Includes a new fixing grommet (same type as original)
  • Not suitable for the later white C64C since that uses a rectangular LED.
  • If you require the version with a longer than normal cable or different LED colour (EG: for the C64G model) - just leave me a note in the special instructions box during checkout.
Price: £ 1.75   Add to cart: (3 in stock)
Power switch for Commodore 64

Power switch for Commodore 64 (salvaged)

Salvaged power switch from a breadbin style C64.

Cleaned and tested: Working

Price: £ 3.50   Add to cart: (0 in stock)

Shopping Tools

Other Pages